Sustainable adsorbent frameworks based on bio-resourced materials and biodegradable polymers in selective phosphate removal for waste-water remediation.

Phosphorus to an optimum extent is an essential nutrient for all living organisms and its scarcity may cause food security, and environmental preservation issues vis-à-vis agroeconomic hurdles. Undesirably excess phosphorus intensifies the eutrophication problem in non-marine water bodies and disrupts the natural nutrient balance of the ecosystem. To overcome such dichotomy, biodegradable polymer-based adsorbents have emerged as a cost-effective and implementable approach in striking a "desired optimum-undesired excess" balance pertaining to phosphate in a sustainable manner. So far, the reports on adopting such adsorbent-approach for wastewater remediation remained largely scattered, unstructured, and poorly correlated. In this background, the contextual review comprehensively discusses the current state-of-the-art in utilizing biodegradable polymeric frameworks as an adsorbent system for phosphate removal and its efficient recovery from the aquatic ecosystem, while highlighting their characteristics-specific functional efficiency vis-à-vis easiness of synthetic and commercial viability. The overview further delves into the sources and environmental ramifications of excessive phosphorus in water bodies and associated mechanistic pathways of phosphorus removal via adsorption, precipitation, and membrane filtration enabled by biodegradable (natural and synthetic) polymeric substrates. Finally, functionality optimization, degradability tuning, and adsorption selectivity of biodegradable polymers are highlighted, while aiming to strike a balance in "removal-recovery-reuse" dynamics of phosphate. Thus, the current review not only paves the way for future exploration of biodegradable polymers in sustainable cost-effective adsorbents for phosphorus removal but also can serve as a guide for researchers dealing with this critical issue.

Processing of Thin Films Based on Cellulose Nanocrystals and Biodegradable Polymers by Space-Confined Solvent Vapor Annealing and Morphological Characteristics.

L-poly(lactic acid), poly(3-hydroxybutyrate), and poly-hydroxybutyrate-co-hydroxyvalerate are biodegradable polymers that can be obtained from renewable biomass sources. The aim of this study was to develop three types of environmentally friendly film biocomposites of altered microstructure by combining each of the above-mentioned polymers with cellulose nanocrystal fillers and further processing the resulting materials via space-confined solvent vapor annealing. Cellulose was previously obtained from renewable biomass and further converted to cellulose nanocrystals by hydrolysis with the lactic acid. The solutions of biodegradable polymers were spin-coated onto solid substrates before and after the addition of cellulose nanocrystals. The obtained thin film composites were further processed via space-confined solvent vapor annealing to eventually favor their crystallization and, thus, to alter the final microstructure. Indeed, atomic force microscopy studies have revealed that the presence of cellulose nanocrystals within a biodegradable polymer matrix promoted the formation of large crystalline structures exhibiting fractal-, spherulitic- or needle-like morphologies.

New Biodegradable Copolymers Based on Betulin and Hydroxycarboxylic Acid Derivatives.

In this study, we propose an approach to the synthesis of new biodegradable polymer materials based on renewable raw feedstock (betulin) and derivatives of hydroxycarboxylic acids using a catalyst/catalytic system (γ-Al2O3, γ-Al2O3/TBHP) that is safe for health and the environment. The resulting polymers are linear thermoplastic polymers that undergo collapse upon melting in the presence of atmospheric oxygen. Moreover, these polymers demonstrate non-toxicity towards a range of Gram-positive and Gram-negative bacteria. The polycondensation of betulin with butyl lactate is particularly noteworthy.

Synthesis and Morphology Characteristics of New Highly Branched Polycaprolactone PCL.

A simple and efficient method for the synthesis of biodegradable, highly branched polycaprolactone (PCL) is presented. The solvent-free (bulk) reaction was carried out via ring opening polymerization (ROP), catalyzed by tin octanoate Sn(Oct)2, and it employed hyperbranched polyamide (HPPA) as a macro-initiator. The core-shell structure of the obtained products (PCL-HPPA), with the hyperbranched HPPA core and linear PCL chains as shell, was in the focus of the product characterization. 1H nuclear magnetic resonance (1H NMR) and elemental analysis confirmed the covalent incorporation of the HPPA in the products, as well as a high degree of grafting conversion of its amino functional groups. Confocal Raman Micro spectroscopy, and especially Time-of-Flight Secondary Ion Mass Spectrometry, further supported the existence of a core-shell structure in the products. Direct observation of macromolecules by means of cryogenic transmission electron microscopy, as well as gel permeation chromatography (GPC), suggested the existence of a minor 'aggregated' product fraction with multiple HPPA cores, which was attributed to transesterification reactions. Differential scanning calorimetry, as well as X-ray diffraction, demonstrated that the PCL-HPPA polymers displayed a similar degree of crystallinity to linear neat PCL, but that the branched products possessed smaller and less regular crystallites.

Bioresorbable molybdenum temporary epicardial pacing wires.

Cardiac pacing with temporary epicardial pacing wires (TEPW) is used to treat rhythm disturbances after cardiac surgery. Occasionally, TEPW cannot be mechanically extracted and remain in the thorax, where they may rarely cause serious complications like migration and infection. We aim to develop bioresorbable TEPW that will dissolve over time even if postoperative removal is unsuccessful. In the present study, we demonstrate a completely bioresorbable design using molybdenum (Mo) as electric conductor and the resorbable polymers poly(D, L-lactic-co-glycolic acid) (PLGA) and polycaprolactone (PCL) for electrically insulating double-coating. We compared the pacing properties of these Mo TEPW demonstrators to conventional steel TEPW in Langendorff-perfused rat hearts and observed similar functionality. In vitro, static immersion tests in simulated body fluid for up to 28 days elucidated the degradation behaviour of uncoated Mo strands and the influence of polymer coating thereon. Degradation was considerably reduced in double-coated Mo TEPW compared to the uncoated and the PLGA-coated condition. Furthermore, we confirmed good biocompatibility of Mo degradation products in the form of low cytotoxicity in cell cultures of human cardiomyocytes and cardiac fibroblasts. STATEMENT OF SIGNIFICANCE: Temporary pacing wires are routinely implanted on the heart surface to treat rhythm disturbances in the days following cardiac surgery. Subsequently, these wires are to be removed. When removal attempts are unsuccessful, wires are cut at skin level and the remainders are left inside the chest. Retained fragments may migrate within the body or become a centre of infection. These complications may be prevented using resorbable pacing wires. We manufactured completely resorbable temporary pacing wires using molybdenum as electrical conductor and assessed their function, degradation and biological compatibility. Our study represents an important step in the development of a safer approach to the treatment of rhythm disturbances after cardiac surgery.

Production of Polyhydroxyalkanoates for Biodegradable Food Packaging Applications Using Haloferax mediterranei and Agrifood Wastes.

Polyhydroxyalkanoates (PHAs) are high-value biodegradable polyesters with thermoplastic properties used in the manufacturing of different products such as packaging films. PHAs have gained much attention from researchers and industry because of their biobased nature and appropriate features, similar to conventional synthetic plastics. This review aims to discuss some of the recent solutions to challenges associated with PHA production. The implementation of a cost-effective process is presented by following different strategies, such as the use of inexpensive carbon sources, the selection of high-producing microorganisms, and the functionalization of the final materials to make them suitable for food packaging applications, among others. Research efforts are needed to improve the economic viability of PHA production at a large scale. Haloferax mediterranei is a promising producer of PHAs due to its ability to grow in non-sterile conditions and the possibility of using seawater to prepare the growth medium. Additionally, downstream processing for PHA extraction can be simplified by treating the H. mediterranei cells with pure water. Further research should focus on the optimization of the recycling conditions for the effluents and on the economic viability of the side streams reutilization and desalinization as an integrated part of PHA biotechnological production.

Xanthohumol-A Miracle Molecule with Biological Activities: A Review of Biodegradable Polymeric Carriers and Naturally Derived Compounds for Its Delivery.

Xanthohumol (Xn), a prenylated chalcone found in Hop (Humulus lupulus L.), has been shown to have potent anti-aging, diabetes, inflammation, microbial infection, and cancer properties. Unfortunately, this molecule has undesirable characteristics such as inadequate intake, low aqueous solubility, and a short half-life. To address these drawbacks, researchers have made numerous attempts to improve its absorption, solubility, and bioavailability. Polymeric drug delivery systems (PDDSs) have experienced significant development over the last two decades. Polymeric drug delivery is defined as a formulation or device that allows the introduction of a therapeutic substance into the body. Biodegradable and bioreducible polymers are the ideal choice for a variety of new DDSs. Xn formulations based on biodegradable polymers and naturally derived compounds could solve some of the major drawbacks of Xn-based drug delivery. In this regard, the primary concern of this study is on presenting innovative formulations for Xn delivery, such as nanoparticles (NPs), nanomicelles, nanoliposomes, solid lipid nanoparticles (SLNs), and others, as well as the received in vitro and in vivo data. Furthermore, this work describes the chemistry and broad biological activity of Xn, which is particularly useful in modern drug technology as well as the cosmetics industry. It is also important to point out that the safety of using Xn, and its biotransformation, pharmacokinetics, and clinical applications, have been thoroughly explained in this review.

Sustainable Soil Additives for Water and Micronutrient Supply: Swelling and Chelating Properties of Polyaspartic Acid Hydrogels Utilizing Newly Developed Crosslinkers.

Drought and water shortage are serious problems in many arid and semi-arid regions. This problem is getting worse and even continues in temperate climatic regions due to climate change. To address this problem, the use of biodegradable hydrogels is increasingly important for the application as water-retaining additives in soil. Furthermore, efficient (micro-)nutrient supply can be provided by the use of tailored hydrogels. Biodegradable polyaspartic acid (PASP) hydrogels with different available (1,6-hexamethylene diamine (HMD) and L-lysine (LYS)) and newly developed crosslinkers based on diesters of glycine (GLY) and (di-)ethylene glycol (DEG and EG, respectively) were synthesized and characterized using Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) and regarding their swelling properties (kinetic, absorbency under load (AUL)) as well as biodegradability of PASP hydrogel. Copper (II) and zinc (II), respectively, were loaded as micronutrients in two different approaches: in situ with crosslinking and subsequent loading of prepared hydrogels. The results showed successful syntheses of di-glycine-ester-based crosslinkers. Hydrogels with good water-absorbing properties were formed. Moreover, the developed crosslinking agents in combination with the specific reaction conditions resulted in higher water absorbency with increased crosslinker content used in synthesis (10% vs. 20%). The prepared hydrogels are candidates for water-storing soil additives due to the biodegradability of PASP, which is shown in an exemple. The incorporation of Cu(II) and Zn(II) ions can provide these micronutrients for plant growth.

Synthesis of shape-programmable elastomer for a bioresorbable, wireless nerve stimulator.

Materials that have the ability to manipulate shapes in response to stimuli such as heat, light, humidity and magnetism offer a means for versatile, sophisticated functions in soft robotics or biomedical implants, while such a reactive transformation has certain drawbacks including high operating temperatures, inherent rigidity and biological hazard. Herein, we introduce biodegradable, self-adhesive, shape-transformable poly (L-lactide-co-ε-caprolactone) (BSS-PLCL) that can be triggered via thermal stimulation near physiological temperature (∼38 °C). Chemical inspections confirm the fundamental properties of the synthetic materials in diverse aspects, and study on mechanical and biochemical characteristics validates exceptional stretchability up to 800 % and tunable dissolution behaviors under biological conditions. The integration of the functional polymer with a bioresorbable electronic system highlights potential for a wide range of biomedical applications.

Advanced tools for molecular characterization of bio-based and biodegradable polymers.

Bio-based and biodegradable materials play a vital role in a sustainable and green economy. These materials must exhibit properties that are similar to or better than the properties of oil- or coal-based materials and require sophisticated synthesis technologies and detailed knowledge of structure-property correlations. For comprehensive molecular structure elucidation, advanced analytical methods, including coupled and hyphenated techniques that combine advanced fractionation and information-rich spectroscopic detectors, are an indispensable tool. One important tool for fractionating complex polymers regarding molecular size is size exclusion chromatography. For fractionating polymers with regard to chemical composition, solvent (or temperature) gradient HPLC has been developed. The combination of different liquid chromatography methods in comprehensive two-dimensional HPLC setups is another important tool. Today, a toolbox of HPLC methods is in place that enables the fractionation of complex bio-based and biodegradable polymers according to the most important molecular parameters including molecular size, composition, functionality, and branching. Here, an overview of the different techniques and some major applications is presented. Some representative developments in the field are discussed, and different techniques, experimental protocols, and applications are highlighted.

Application of MicroResp™ for quick and easy detection of plastic degradation by marine bacterial isolates.

Microplastic debris in the marine environment is a global problem. Biodegradable polymers are being developed as alternatives to petroleum-based plastics, and quick and easy methods for screening for bacterial strains that can degrade such polymers are needed. As a screening method, the clear zone method has been widely used but has technical difficulties such as plate preparation and interpretation of results. In this study, we adapted the MicroResp™ system to easily detect biodegradation activity of marine bacteria in a 3-day assay. Among the 6 bacterial strains tested, 3, 2 and 1 strain degraded poly (butylene succinate-co-adipate) (PBSA), poly (ε-caprolactone) (PCL) and poly (3-hydroxybutyrate-co-3-hydroxyhexanoate), respectively. Only one strain that showed degradation activity of PBSA and PCL in the MicroResp™ system was also positive in the clear zone assay on the respective emulsion plates. Our results show that the adapted MicroResp™ system can screen for bacterial strains that degrade plastic.

Bactericidal Biodegradable Linear Polyamidoamines Obtained with the Use of Endogenous Polyamines.

The work presents the synthesis of a series of linear polyamidoamines by polycondensation of sebacoyl dichloride with endogenous polyamines: putrescine, spermidine, spermine, and norspermidine-a biogenic polyamine not found in the human body. During the synthesis carried out via interfacial reaction, hydrophilic, semi-crystalline polymers with an average viscosity molecular weight of approximately 20,000 g/mol and a melting point of approx. 130 °C were obtained. The structure and composition of the synthesized polymers were confirmed based on NMR and FTIR studies. The cytotoxicity tests performed on human fibroblasts and keratinocytes showed that the polymers obtained with spermine and norspermidine were strongly cytotoxic, but only in high concentrations. All the other examined polymers did not show cytotoxicity even at concentrations of 2000 µg/mL. Simultaneously, the antibacterial activity of the obtained polyamides was confirmed. These polymers are particularly active against E. Coli, and virtually all the polymers obtained demonstrated a strong inhibitory effect on the growth of cells of this strain. Antimicrobial activity of the tested polymer was found against strains like Staphylococcus aureus, Staphylococcus epidermidis, and Pseudomonas aeruginosa. The broadest spectrum of bactericidal action was demonstrated by polyamidoamines obtained from spermine, which contains two amino groups in the repeating unit of the chain. The obtained polymers can be used as a material for forming drug carriers and other biologically active compounds in the form of micro- and nanoparticles, especially as a component of bactericidal creams and ointments used in dermatology or cosmetology.

Recent Progress of Biodegradable Polymer Package Materials: Nanotechnology Improving Both Oxygen and Water Vapor Barrier Performance.

Biodegradable polymers have become a topic of great scientific and industrial interest due to their environmentally friendly nature. For the benefit of the market economy and environment, biodegradable materials should play a more critical role in packaging materials, which currently account for more than 50% of plastic products. However, various challenges remain for biodegradable polymers for practical packaging applications. Particularly pertaining to the poor oxygen/moisture barrier issues, which greatly limit the application of current biodegradable polymers in food packaging. In this review, various strategies for barrier property improvement are summarized, such as chain architecture and crystallinity tailoring, melt blending, multi-layer co-extrusion, surface coating, and nanotechnology. These strategies have also been considered effective ways for overcoming the poor oxygen or water vapor barrier properties of representative biodegradable polymers in mainstream research.

Superfluorinated, Highly Water-Soluble Polyphosphazenes as Potential 19F Magnetic Resonance Imaging (MRI) Contrast Agents.

"Hot spot" 19F magnetic resonance imaging (MRI) has garnered significant attention recently for its ability to image various disease markers quantitatively. Unlike conventional gadolinium-based MRI contrast agents, which rely on proton signal modulation, 19F-MRI's direct detection has a unique advantage in vivo, as the human body exhibits a negligible background 19F-signal. However, existing perfluorocarbon (PFC) or PFC-based contrast materials suffer from several limitations, including low longitudinal relaxation rates and relatively low imaging efficiency. Hence, we designed a macromolecular contrast agent featuring a high number of magnetically equivalent 19F-nuclei in a single macromolecule, adequate fluorine nucleus mobility, and excellent water solubility. This design utilizes superfluorinated polyphosphazene (PPz) polymers as the 19F-source; these are modified with sodium mercaptoethanesulfonate (MESNa) to achieve water solubility exceeding 360 mg/mL, which is a similar solubility to that of sodium chloride. We observed substantial signal enhancement in MRI with these novel macromolecular carriers compared to non-enhanced surroundings and aqueous trifluoroacetic acid (TFA) used as a positive control. In conclusion, these novel water-soluble macromolecular carriers represent a promising platform for future MRI contrast agents.

Silver nanoparticle reinforced polylactic acid and gelatin composite films for advanced wound dressing.

Multifunctional and biodegradable dressings with high mechanical strength and good antibacterial activity are crucial in fundamental health services. This study was initiated to prepare a novel curative wound dressing film consisting of natural biodegradable gelatin (G) and polylactic acid (PLA) with silver nanoparticles (AgNPs) where glutaraldehyde (GA) was used as compatibilizer. The prepared composite films addressed the poor thermal and biological stability of G and the limited fluid retention capacity of PLA. Silver nanoparticles were prepared by basic chemical reduction and reinforced on polymer films using simple solvent casting, which obviated common clinical infections and accelerated wound closure rate (p < .05). Fourier transform infrared (FTIR) studies confirmed composite formation through H-bonding and X-ray diffraction (XRD) revealed increased crystallinity due to incorporating AgNPs. Films with G, PLA & GA (50:50:5 by volume) introduced the best elasticity & strength with excellent fluid retention properties (p < .05). Scanning electron microscopy (SEM) images unfolded surface morphology and presence of agglomerated AgNPs on film surfaces. Prepared films exhibited significant antimicrobial efficacy against Staphylococcus aureus and Pseudomonas sp. and showed excellent cell viability (>97 %) in Vero cell line. Finally, an in vivo mouse model study showed 99.7 % contraction (p < .05) within 12 days, which was most effectual and 12 % faster than conventional gauge bandages. These results demonstrated the promising and cost-effective potential of the prepared film for wound healing.

Degradation of Polylactic Acid/Polypropylene Carbonate Films in Soil and Phosphate Buffer and Their Potential Usefulness in Agriculture and Agrochemistry.

Blends of poly(lactic acid) (PLA) with poly(propylene carbonate) (PPC) are currently in the phase of intensive study due to their promising properties and environmentally friendly features. Intensive study and further commercialization of PPC-based polymers or their blends, as usual, will soon face the problem of their waste occurring in the environment, including soil. For this reason, it is worth comprehensively studying the degradation rate of these polymers over a long period of time in soil and, for comparison, in phosphate buffer to understand the difference in this process and evaluate the potential application of such materials toward agrochemical and agricultural purposes. The degradation rate of the samples was generally accompanied by weight loss and a decrease in molecular weight, which was facilitated by the presence of PPC. The incubation of the samples in the aqueous media yielded greater surface erosions compared to the degradation in soil, which was attributed to the leaching of the low molecular degradation species out of the foils. The phytotoxicity study confirmed the no toxic impact of the PPC on tested plants, indicating it as a "green" material, which is crucial information for further, more comprehensive study of this polymer toward any type of sustainable application.

Adhesive, Flexible, and Fast Degradable 3D-Printed Wound Dressings with a Simple Composition.

3D printing technology has revolutionized the field of wound dressings, offering tailored solutions with mechanical support to facilitate wound closure. In addition to personalization, the intricate nature of the wound healing process requires wound dressing materials with diverse properties, such as moisturization, flexibility, adhesion, anti-oxidation and degradability. Unfortunately, current materials used in digital light processing (DLP) 3D printing have been inadequate in meeting these crucial criteria. This study introduces a novel DLP resin that is biocompatible and consists of only three commonly employed non-toxic compounds in biomaterials, that is, dopamine, poly(ethylene glycol) diacrylate, and N-vinylpyrrolidone. Simple as it is, this material system fulfills all essential functions for effective wound healing. Unlike most DLP resins that are non-degradable and rigid, this material exhibits tunable and rapid degradation kinetics, allowing for complete hydrolysis within a few hours. Furthermore, the high flexibility enables conformal application of complex dressings in challenging areas such as finger joints. Using a difficult-to-heal wound model, the manifold positive effects on wound healing in vivo, including granulation tissue formation, inflammation regulation, and vascularization are substantiated. The simplicity and versatility of this material make it a promising option for personalized wound care, holding significant potential for future translation.

Enabling Proregenerative Medical Devices via Citrate-Based Biomaterials: Transitioning from Inert to Regenerative Biomaterials.

Regenerative medicine aims to restore tissue and organ function without the use of prosthetics and permanent implants. However, achieving this goal has been elusive, and the field remains mostly an academic discipline with few products widely used in clinical practice. From a materials science perspective, barriers include the lack of proregenerative biomaterials, a complex regulatory process to demonstrate safety and efficacy, and user adoption challenges. Although biomaterials, particularly biodegradable polymers, can play a major role in regenerative medicine, their suboptimal mechanical and degradation properties often limit their use, and they do not support inherent biological processes that facilitate tissue regeneration. As of 2020, nine synthetic biodegradable polymers used in medical devices are cleared or approved for use in the United States of America. Despite the limitations in the design, production, and marketing of these devices, this small number of biodegradable polymers has dominated the resorbable medical device market for the past 50 years. This perspective will review the history and applications of biodegradable polymers used in medical devices, highlight the need and requirements for regenerative biomaterials, and discuss the path behind the recent successful introduction of citrate-based biomaterials for manufacturing innovative medical products aimed at improving the outcome of musculoskeletal surgeries.

Potential application of hydroxypropyl methylcellulose/shellac embedded with graphene oxide/TiO2-Nps as natural packaging film.

Graphene oxide (GO), TiO2-NPs, HPMC, and shellac are environmentally green polymers and nanocomposites. This work aimed to create biodegradable composite films made of HPMC/shellac, HPMC/shellac-GO, and HPMC/shellac-GO/TiO2-NPs by film casting. TiO2-HPMC/shellac-GO matrix's dispersibility and mixing ability were characterized and observed using FTIR and XRD. XRD analysis shows that the crystallinity decreased within the composites due to breaking H-bonding. Compared to HPMC/shellac, TGA/DTG demonstrated the composite films' superior thermal stability. TiO2 (0.08-0.16 %) was cast into a composite film comprising HPMC, shellac, and GO. The homogeneity of TiO2 distribution in the composite film was shown using a SEM, which was also used to display the morphology of nanocomposite films. Nanocomposite films' thickness, air permeability, tensile strength, Young's modulus, and burst strength were examined. The results demonstrated that natural films prepared by a combination of shellac/GO with HPMC enhanced the fabricating of films' properties, the tensile strength increased by 231 % (from 16 to 53 MPa) in HPMC and HPSG2 (HPMC 1.9 g/shellac 0.25 g/GO 0.125 g in 100 mL) respectively, whereas the contact angle did not change. And after addition of TiO2-NPs, there were high enhancements in HPMC films' properties, such tensile strength increased by 212 % (from 16 to 50 MPa), burst strength increased by 20.96 % (3.1 to 3.75 Kg/cm2), and the contact angle by 60.86 % (48 to 74°) in HPMC and HPSGT2 respectively. Compared to HPMC films, films exhibited the highest levels of antibacterial activity against E. coli, B. mycoides, and C. albicans. So, the composite films from HPMC/shellac/GO/TiO2-NPs are promising potential packaging materials.

Long-term in vivo degradation and biocompatibility of degradable pHEMA hydrogels containing graphene oxide.

Developing biocompatible, non-fouling and biodegradable hydrogels for blood-contacting devices remains a demanding challenge. Such materials should promote natural healing, prevent clotting, and undergo controlled degradation. This study evaluates the biocompatibility and biodegradation of degradable poly(2-hydroxyethyl methacrylate) (d-pHEMA) hydrogels with or without reinforcement with oxidized few-layer graphene (d-pHEMA/M5ox) in a long term implantation in rats, assessing non-desired side-effects (irritation, chronic toxicity, immune response). Subcutaneous implantation over 6 months revealed degradation of both hydrogels, despite slower for d-pHEMA/M5ox, with degradation products found in intracellular vesicles. No inflammation nor infection at implantation areas were observed, and no histopathological findings were detected in parenchymal organs. Immunohistochemistry confirmed d-pHEMA and d-pHEMA/M5ox highly anti-adhesiveness. Gene expression of macrophages markers revealed presence of both M1 and M2 macrophages at all timepoints. M1/M2 profile after 6 months reveals an anti-inflammatory environment, suggesting no chronic inflammation, as also demonstrated by cytokines (IL-α, TNF-α and IL-10) analysis. Overall, modification of pHEMA towards a degradable material was successfully achieved without evoking a loss of its inherent properties, specially its anti-adhesiveness and biocompatibility. Therefore, these hydrogels hold potential as blank-slate for further modifications that promote cellular adhesion/proliferation for tissue engineering applications, namely for designing blood contacting devices with different load bearing requirements. STATEMENT OF SIGNIFICANCE: Biocompatibility, tunable biodegradation kinetics, and suitable immune response with lack of chronic toxicity and irritation, are key features in degradable blood contact devices that demand long-term exposure. We herein evaluate the 6-month in vivo performance of a degradable and hemocompatible anti-adhesive hydrogel based in pHEMA, and its mechanically reinforced formulation with few-layer graphene oxide. This subcutaneous implantation in a rat model, shows gradual degradation with progressive changes in material morphology, and no evidence of local inflammation in surrounding tissue, neither signs of inflammation or adverse reactions in systemic organs, suggesting biocompatibility of degradation products. Such hydrogels exhibit great potential as a blank slate for tissue engineering applications, including for blood contact, where cues for specific cells can be incorporated.